Recommended for use on brick, ceramic tile, marble, grout, porcelain and quarry tile, slate, terrazzo, sand stone, limestone, concrete, quartz and travertine. All tile and stone must be
cemented and grouted following cure times per manufacturer’s directions prior to application of this penetrating sealer.
1. Clean surface with appropriate Betco industrial cleaner and allow to dry.
2. Apply liberally with clean synthetic mop, sponge or squeegee making sure all surfaces and grout are thoroughly saturated.
3. Allow sealer to dry 30 to 60 minutes depending on conditions. Apply second coat if necessary for more porous surfaces.
4. Do not allow foot traffic until completely dry.
5. Wet clean any residue 12 hours after application.