Concrete Stain & Etch Removal Kit

Saturate stained area with wet mop and Betco Densiclean at 0.5 oz. per gallon (1:256). Apply Betco LiquiGrind to fully cover stain and allow to dwell 10 minutes; 250 sq/ft per quart or 1000 sq/ft per gallon. Attach Betco Honing Tool onto drive plate of swing machine (NOTE: Machine pad drivers vary. This may require the use of a velcro pad on pad driver.) Begin Honing Process across entire stained area, overlapping 25% on each pass. A swing machine may require 25-40 passes to remove Stain/Etch. Rewet stain area with LiquiGrind if slurry becomes dry or paste like. Clean and vacuum stained area; if stain is not sufficiently removed, repeat process until stain is removed. Clean area with Betco Denisclean at 0.5 oz. per gallon (1:256). Apply Betco Densifier to honed area, and allow to dry; 2000 sq/ft per gallon or 500 sq/ft per quart. Attach Betco Polishing Tool onto drive plate of swing machine. Polish area, overlapping 25% on each pass, utilizing 25-40 passes as before to remove stain/etch. Clean area thoroughly with mop and bucket or auto scrubber. Apply Betco Stain Defense and allow to dry; 1000 sq/ft per quart or 4000 sq/ft per gallon. "Buff" area with Betco SI Pad to blend area with surrounding floor.