DIRECTIONS FOR USE: PREPARATION OF USE SOLUTION For water hardness up to 400 ppm add 4 ml per litre of water (1:256) to disinfect hard non-porous surfaces. This product can be applied by mop, sponge, cloth, paper towel, (hand pump) coarse trigger sprayer, auto scrubber or foam gun (device). Change cloth, sponge or towels frequently to avoid redeposition of soil. For disinfection, all surfaces must remain wet for 10 minutes. For heavily soiled areas, a preliminary cleaning is required. For sprayer applications use a coarse spray device. Spray 15 cm – 20 cm from surface, rub with brush, sponge or cloth. Do not breathe spray. Treated surfaces must remain wet for 10 minutes. Rinse or allow to air dry. Rinsing of floors is not necessary unless they are to be waxed or polished. Prepare a freshsolution at least daily or when use solution becomes diluted or soiled. Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse. Do not use this product to clean or disinfect utensils, glassware or dishes.For Use as a (General) Cleaner and or Deodorizer: Apply use solution to surfaces. Wipe surfaces (and let air dry).
ANIMAL HOUSING FACILITIES: This product cleans by removing dirt, grime, mold, mildew, blood, urine, fecal matter and other common soils found in animal housing facilities, livestock, swine or poultry facilities, grooming facilities, farms, kennels, pet stores, veterinary clinics, laboratories or other small animal facilities. It also eliminates odors leaving surfaces smelling clean and fresh. This product cleans, disinfects and deodorizes hard, non-porous environmental surfaces in one step. Its non-abrasive formula is designed for use on plated or stainless steel, aluminum, chrome, glazed porcelain, glazed tile, laminated surfaces associated with floors, walls, countertops, cages, kennels, animalequipment found in animal housing facilities. For Use for Treatment of Animal Housing Facilities: 1. Remove all animals and feeds from areas being treated. 2. Remove all litter and manure from floors, walls and surfaces ofbarns, pens, stalls, chutes and other facilities occupied or transversed by animals. 3. Empty all troughs, racks and other feeding and watering appliances. 4. Thoroughly clean all surfaces with soap and detergent and rinse with water. 5. Apply fresh use solution to floors,walls, cages and other washable hard, non-porous environmental surfaces. For smaller surfaces, use a coarse trigger spray bottle to spray all surfaces with solution until wet. To disinfect, all surfaces must remain wet for ten (10) minutes. 6. Ventilate buildings and other closed spaces. 7. Do not house animals or re-employ equipment until product has dried. 8. For disinfection of feed racks, troughs, automatic feeders, fountains and watering appliances scrub with use-solution, let stand ten (10) minutes. Then thoroughly scrub all treated surfaces with soap and detergent and rinse with potable water before reuse.