92501-92_GeneSys_Manual

4 SAFETY INFORMATION The safety instructions and guidelines below must be carefully followed in order to avoid harm to the operator and damage to the machine. • Read all labels on the machine carefully. Do not cover them for any reason and replace them immediately if they become damaged. • The machine must be used exclusively by authorized and trained personnel. • When operating the machine be careful of other people. • The machine is not designed for cleaning carpets. • The power cable outlet must be provided with a proper ground. • Avoid damaging the power cable of the battery charger by crushing, bending, cutting or stressing it. • Whenever the power cable of the battery charger is damaged, immediately contact a BETCO service center. • Do not mix different types of detergent as this may produce harmful gases. • Do not set containers on the machine. • Machine storage temperature is between -10°F and 130°F, never store outside under humid conditions. • Operating conditions: room temperature between 33°F and 100°F with relative humidity between 30% to 95%. • Only use the machine in closed areas and do not expose it directly to rain. • Never use the machine in an explosive environment. • Do not use the machine as a means of transport. • Never use acidic chemicals which could damage the machine. • Avoid running the brushes with the machine stopped; this could damage the floor. • Never vacuum up flammable liquids. • Never use the machine to gather dangerous powders. • Use a powder fire extinguisher in case of fire. Do not use water. • Do not hit against shelving or scaffolding. The operator must always be equipped with the appropriate safety device (gloves, shoes, helmet, glasses, etc.) • Do not use the machine on surfaces with an inclination greater than the one shown on the serial plate. • The machine is designed to wash and dry floors simultaneously. Signal the presence of wet floors with suitable signs. • If the machine does not work properly, perform routine maintenance. Otherwise, request the assistance of the BETCO ® technical service. • When replacing parts ask for ORIGINAL spare parts from your Authorized BETCO Dealer and/or Retailer. • Always turn off the machine and diskonnect the battery connector whenever maintenance is performed. • Never remove guards that require tools for removal. • Never wash the machine with direct or pressurized jets of water or with corrosive substances. • Have your BETCO service center check the machine once a year. • To prevent the formation of scale in the solution tank filter, do not store the machine with detergent solution in the tanks. • Before using the machine make sure that all doors and covers are positioned as shown in this operating and maintenance manual. • When your BETCO machine is ready to be retired, the machine must be disposed of properly. It contains oils and electronic components. The machine was built using totally recyclable materials. • Use only pads furnished with the machine or those specified in the user's manual. Use of other pads can compromise safety. • When removing the battery, unplug the battery connection, unplug the charger and diskonnect the battery terminals. • Before recycling the machine, remove the battery.